tail -f /var/log/syslog

Verbindungsaufbau
=================

Oct  1 20:56:42 localhost pppd[3111]: Plugin userpass.so loaded.
Oct  1 20:56:42 localhost pppd[3111]: userpass: $Revision: 1.5 $
Oct  1 20:56:42 localhost pppd[3111]: Plugin capiplugin.so loaded.
Oct  1 20:56:42 localhost pppd[3111]: capiplugin: $Revision: 1.36 $
Oct  1 20:56:42 localhost pppd[3111]: capiconn:  1.10
Oct  1 20:56:42 localhost pppd[3112]: pppd 2.4.3 started by root, uid 0
Oct  1 20:56:42 localhost pppd[3112]: capiplugin: phase serialconn.
Oct  1 20:56:42 localhost pppd[3112]: controller 1: listen_change_state state=1 event=1 ????
Oct  1 20:56:42 localhost last message repeated 2 times
Oct  1 20:56:42 localhost pppd[3112]: capiplugin: dialing 01920781 (hdlc)
Oct  1 20:56:42 localhost pppd[3112]: controller 1: listen_change_state state=0 event=3 ????
Oct  1 20:56:42 localhost last message repeated 2 times
Oct  1 20:56:43 localhost pppd[3112]: capiplugin: connected: "" -> "01920781" outgoing
Oct  1 20:56:43 localhost pppd[3112]: capiplugin: using /dev/capi/0: "" -> "01920781" outgoing
Oct  1 20:56:43 localhost kernel: capilib_new_ncci: kcapi: appl 2 ncci 0x10101 up
Oct  1 20:56:44 localhost pppd[3112]: Using interface ppp0
Oct  1 20:56:44 localhost pppd[3112]: Connect: ppp0 <--> /dev/capi/0
Oct  1 20:56:44 localhost pppd[3112]: capiplugin: phase establish (was serialconn).
Oct  1 20:56:44 localhost pppd[3112]: capiplugin: phase authenticate (was establish).
Oct  1 20:56:44 localhost pppd[3112]: CHAP authentication succeeded
Oct  1 20:56:44 localhost pppd[3112]: capiplugin: phase network (was authenticate).
Oct  1 20:56:44 localhost pppd[3112]: not replacing default route to eth1 [192.168.10.1]
Oct  1 20:56:44 localhost pppd[3112]: Cannot determine ethernet address for proxy ARP
Oct  1 20:56:44 localhost pppd[3112]: local  IP address 145.254.159.99
Oct  1 20:56:44 localhost pppd[3112]: remote IP address 145.253.1.117
Oct  1 20:56:44 localhost pppd[3112]: capiplugin: phase running (was network).


Verbindungsabbau
================

Oct  1 20:57:03 localhost pppd[3112]: Terminating on signal 15
Oct  1 20:57:03 localhost pppd[3112]: capiplugin: phase terminate (was running).
Oct  1 20:57:03 localhost pppd[3112]: capiplugin: phase network (was terminate).
Oct  1 20:57:03 localhost pppd[3112]: Connect time 0.4 minutes.
Oct  1 20:57:03 localhost pppd[3112]: Sent 0 bytes, received 0 bytes.
Oct  1 20:57:03 localhost pppd[3112]: capiplugin: phase establish (was network).
Oct  1 20:57:03 localhost pppd[3112]: capiplugin: phase disconnect (was establish).
Oct  1 20:57:03 localhost pppd[3112]: Connection terminated.
Oct  1 20:57:03 localhost pppd[3112]: capiplugin: phase dead (was disconnect).
Oct  1 20:57:03 localhost pppd[3112]: controller 1: listen_change_state state=1 event=1 ????
Oct  1 20:57:03 localhost last message repeated 2 times
Oct  1 20:57:03 localhost pppd[3112]: controller 1: listen_change_state state=0 event=3 ????
Oct  1 20:57:03 localhost last message repeated 2 times
Oct  1 20:57:03 localhost kernel: kcapi: appl 2 ncci 0x10101 down
Oct  1 20:57:04 localhost pppd[3112]: capiplugin: disconnect(local): "" -> "01920781" outgoing 0x3400 (0x3301) - No additional information
Oct  1 20:57:05 localhost pppd[3112]: controller 1: listen_change_state state=1 event=1 ????
Oct  1 20:57:05 localhost last message repeated 2 times
Oct  1 20:57:05 localhost pppd[3112]: capiplugin: exit
Oct  1 20:57:05 localhost pppd[3112]: Exit.